Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
Figure 7- 6. Application's Authentication Settings
The following parameters can be set:
Parameter Description
Application
Lists the configuration applications on the Switch. The user may configure the
Login Method List and Enable Method List for authentication for users utilizing
the Console (Command Line Interface) application, the Telnet application, SSH
and the WEB (HTTP) application.
Login Method List
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Login Method
Lists window, in this section, for more information.
Enable Method List
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Enable Method
Lists window, in this section, for more information
Click Apply to implement changes made.
Authentication Server Group Settings
This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used to
group TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using
method lists. The user may define the type of server group by protocol or by previously defined server group. The Switch
has three built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight (8) authentication
server hosts may be added to any particular group.
To view the following window, click Security Management > Access Authentication Control > Authentication Server
Group:
117