Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
SNTP Settings
Current Time Settings
To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on the
Current Time Setting link, revealing the following screen for the user to configure.
Figure 6- 50. Time Settings Page
The following parameters can be set or are displayed:
Parameter Description
Current Time: Status
Current Time
Displays the time when the Switch was initially started for this session.
Time Source
Displays the time source for the system.
Current Time: SNTP Settings
SNTP State
Use this pull-down menu to Enable or Disable SNTP.
SNTP Primary Server
This is the IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
This is the IP address of the secondary server the SNTP information will be taken
from.
SNTP Poll Interval in
Seconds
This is the interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
80