Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
For weighted round-robin queuing, the number of packets sent from each priority queue depends upon the assigned weight.
For a configuration of 8 CoS queues, A~H with their respective weight value: 8~1, the packets are sent in the following
sequence: A1, B1, C1, D1, E1, F1, G1, H1, A2, B2, C2, D2, E2, F2, G2, A3, B3, C3, D3, E3, F3, A4, B4, C4, D4, E4, A5,
B5, C5, D5, A6, B6, C6, A7, B7, A8, A1, B1, C1, D1, E1, F1, G1, H1.
For weighted round-robin queuing, if each CoS queue has the same weight value, then each CoS queue has an equal
opportunity to send packets just like round-robin queuing.
For weighted round-robin queuing, if the weight for a CoS is set to 0, then it will continue processing the packets from this
CoS until there are no more packets for this CoS. The other CoS queues that have been given a nonzero value, and
depending upon the weight, will follow a common weighted round-robin scheme.
Remember that the DES-3550 has 4 priority queues (and four Classes of Service) for each port on the Switch.
Port Bandwidth
The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port.
In the Configuration folder, click Port Bandwidth, to view the screen shown below.
71