D-Link DES-3550 Switch User Manual


 
DES-3550 Fast Ethernet Layer 2 Switch
NOTE: To configure IGMP snooping for the DES-3550, go to the
Configuration folder and select IGMP. Configuration and other
information concerning IGMP snooping may be found in Section 6 of this
manual under IGMP.
IGMP Snooping Forwarding
This window will display the current IGMP snooping forwarding table entries currently configured on the Switch. To view
the following screen, open the Monitoring folder and click the IGMP Snooping Forwarding link.
Figure 8- 18. IGMP Snooping Forwarding Table
The user may search the IGMP Snooping Forwarding Table by VID using the top left hand corner Search.
The following field can be viewed:
Parameter Description
VLAN ID
The VLAN ID (VID) of the multicast group.
Multicast Group
The IP address of the multicast group.
MAC Address
The MAC address of the multicast group.
Port Map
These are the ports where the IGMP packets were snooped are displayed.
VLAN Status
This allows the VLAN status for each of the Switch's ports to be viewed by VLAN. This window displays the ports on the
Switch that are currently Egress or Tag ports. To view the following table, open the Monitoring folder and click the
VLAN Status Link.
161