Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
Figure 7- 16. Enable Method List - Add window
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
•
•
•
•
•
•
•
local_enable - Adding this parameter will require the user to be
authenticated using the local enable password database on the Switch. The
local enable password must be set by the user in the next section entitled
Local Enable Password.
none - Adding this parameter will require no authentication to access the
Switch.
radius - Adding this parameter will require the user to be authenticated using
the RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated
using the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated
using the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated
using the TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the
user to be authenticated using a user-defined server group previously
configured on the Switch.
Local Enable Password
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view the following window, click Security Management > Access Authentication Control > Local Enable
Password:
123