Filter
Top Products
DXS/DWS 3200 Series User Guide
Page 10
The device front panel is configured as follows:
• 48 Gigabit Ethernet ports — RJ-45 ports designated as 10/100/1000Base-T . The RJ-45 ports are desig-
nated as ports Ports 1-48.
• RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
• 4 SFP Ports — There are four SFP port, which contains 1000Base-X (fiber) connections.
On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately.
DXS/DWS-3227 Front Panel
The D-Link DXS-3227 is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network
ports, 4 SFP ports and 1XFP 10G port on the front panel for network connectivity, and 2 optional stacking or uplink
module bays on the back panel.
The following figure illustrates the DXS-3227 front panel:
Figure 2: DXS/DWS-3227 Front Panel
The device front panel is configured as follows:
• 24 Gigabit Ethernet ports — RJ-45 ports designated as 10/100/1000Base-T . The RJ-45 ports are desig-
nated as ports Ports 1-24.
• RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
• 4 SFP Ports — There are four SFP port, which contains 1000Base-X (fiber) connections.
• XFP port — Hot-swappable optical interface for 10 Gigabit, Fibre Channel, Gigabit Ethernet, and other appli-
cations.
On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately.
DXS/DWS-3227P Front Panel
The D-Link DXS-3227P is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network
ports, 4 SFP ports and 1XFP 10G port on the front panel for network connectivity, and 2 optional stacking or uplink
module bays on the back panel. The DXS-3227P model also supports Power Over Ethenret.