Filter
Top Products
DXS/DWS 3200 Series User Guide
Page 172
Defining IP Addresses
The IP Interface Page contains fields for assigning IP addresses. Packets are forwarded to the default IP when
frames are sent to a remote network. The configured IP address must belong to the same IP address subnet of
one of the IP interfaces.
To define an IP interface:
1. Click Basic Setup > IP Configuration > IP Addressing > IP Interface. The IP Interface Page opens:
Figure 106:IP Interface Page
The IP Interface Page contains the following fields:
• IP Address — Displays the currently configured IP address.
• Mask — Displays the currently configured IP address mask.
• Interface — Displays the interface used to manage the device.
– Dynamic — Indicates that the IP address is dynamically created.
– Static — Indicates the IP address is a static IP address.
• Type — Indicates if the IP address has been configured statically or added dynamically.
• Remove — Removes the selected IP address from the interface. The possible field values are:
– Checked — Removes the IP address from the interface.
– Unchecked — Maintains the IP address assigned to the Interface.
2. Click . The Add IP Interface Page opens: