D-Link DWS/DXS-3200 Switch User Manual


 
DXS/DWS 3200 Series User Guide
Page 174
Defining Default Gateways
Packets are forwarded to the default IP when frames are sent to a remote network via the default gateway. The
configured IP address must belong to the same subnet of one of the IP interfaces. To define a default gateway:
1. Click Basic Setup > IP Configuration > IP Addressing > Default Gateway. The Default Gateway Page
opens:
Figure 109:Default Gateway Page
The Default Gateway Page contains the following fields:
User Defined Default Gateway — Defines the default gateway IP address.
Active Default Gateway — Indicates if the default gateway is active. The possible field values are:
Remove User Defined — Removes the default gateway. The possible field values are:
Checked — Removes the selected default gateway.
Unchecked — Maintains the default gateway.
2. Enter an IP address in the User Defined Default Gateway field.
3. Click . The device’s default gateway is defined, and the device is updated.