Filter
Top Products
Configuring Quality of Service
Defining General QoS Settings
Page 243
Defining Queues
The Queue Page contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click Basic Setup > Quality of Service > Global Parameters > Queue. The Queue Page opens.
Figure 160:Queue Page
The Queue Page contains the following fields:
• Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.
• WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. If a
queue is set to 0 weight, the queue is not operational and is effectively closed. Each queue has a weight
range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.
• WRR Weight — Assigns the specific WRR value to the Queue.
• % of WRR Bandwidth — Displays the amount of bandwidth assigned to the queue. These values are fixed
and are not user defined.
2. Select Strict Priority or WRR Fields.
3. Click . The queue settings are set, and the device is updated.