Filter
Top Products
Configuring Ports
Page 115
Section 9. Configuring Ports
The Interface Configuration Page contains fields for defining port parameters.
To define port parameters:
1. Click Basic Setup > Interface > Interface Configuration. The Interface Configuration Page opens.
Figure 65: Interface Configuration Page
The Interface Configuration Ports Table contains the following fields:
• Unit No. — Indicates the stacking member for which the port information is displayed.
• Interface — Displays the port number.
• Port Status — Indicates whether the port is currently operational or non-operational. The possible field val-
ues are:
– Up — Indicates the port is currently operating.
– Down — Indicates the port is currently not operating.
• Port Speed — Displays the configured rate for the port. The port type determines what speed setting options
are available. Port speeds can only be configured when auto negotiation is disabled. The possible field values
are:
– 10 — Indicates the port is currently operating at 10 Mbps.
– 100 — Indicates the port is currently operating at 100 Mbps.
– 1000 — Indicates the port is currently operating at 1000 Mbps.