Filter
Top Products
DXS/DWS 3200 Series User Guide
Page 254
• Remove — Removes policies. The possible field values are:
– Checked — Removes the selected policy.
– Unchecked — Maintains policies.
2. Click . The Add QoS Policy Profile Page opens:
Figure 170:Add QoS Policy Profile Page
In addition to the fields in the Policy Page, the Add QoS Policy Profile Page contains the following fields:
• Class Map — Selects a class map for the class.
• Action — Optional action for the class. Possible values are:
– Trust — Enables Trust Mode for the class. This command is used to distinguish the QoS trust behavior
for given traffic. When a given type is trusted, the QoS mechanism maps a packet to a queue using the
received or default value and the relevant map, as defined on the QoS Settings. By designating trust, it is
possible to trust only incoming traffic with certain DSCP values.
– Set/Mark — Sets the Trust value to a user-defined value.
– New Value — Defines the Set/Mark value.
• Police — Selects the option of configuring a Police entry.
• Type — Policer type for the class. Possible values are:
– Aggregate — Configures the class to use a configured aggregate policer selected from the drop-down
menu. An aggregate policer is defined if the policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes. An aggregate policer can be applied to multiple
classes in the same policy map, but cannot be used across different policy maps.
– Single — Configures the class to use manually configured information rates and exceed actions.
• Aggregate Policer — User-defined aggregate policers.