Filter
Top Products
Defining WLAN
Defining WLAN Access Points
Page 153
Configuring WLAN VLANs
The WLAN Access Point VLANs Page allows network mangers to configure VLANs from access points. The
switch provides VLAN ID of the station. The AP VLAN ID is stored per station basis in the AP tags frames.To
define WLAN VLANs:
1. Click WLAN > Access Point > VLAN. The WLAN Access Point VLANs Page opens:
Figure 94: WLAN Access Point VLANs Page
The WLAN Access Point VLANs Page contains the following fields:
• Select Access Point — Contains a list of either the user-defined access points or the MAC address
assigned to wireless networks. The possible field values.
– Name (AP) — Contains the access points which can be assigned to a WLAN VLAN.
– Mac Address — Contains the MAC Address which can be assigned to a WLAN VLAN.
• Native VLAN — Defines the VLAN to which the access port or MAC address is defined.
• Add New VLAN — Adds a new VLAN to the wireless network.
• Remove Selected VLAN — Removes a VLAN from the wireless network.
2. Select the access point type.
3. Define the Native VLAN field.
4. Remove or Add VLANs using the arrows.
5. Click . The WLAN VLAN is defined, and the device is updated.