D-Link DWS/DXS-3200 Switch User Manual


 
DXS/DWS 3200 Series User Guide
Page 16
Cable Specifications
The following table contains the various cable specification for the DXS/DWS-3200 series:
LED Definitions
The device front panels contain Light Emitting Diodes (LED) that indicate the device status.The different LED
types are as follows:
Port LEDs — Indicate each port status.
SFP Ports — Indicate SFP port status.
System — Indicating the device power supply status.
Port LEDs
1000Base-T Gigabit Ethernet RJ-45 Port LEDs
The LEDs on the three devices are differently indicated. The following figure illustrates the DXS-3250 port LEDs.
Table 1: DXS-3250/DXS-3227P Cables and Optical Modules Specifications
Cable Type Description
1000Base-T UTP Cat. 5e (100 meters max.)
UTP Cat. 5 (100 meters max.)
EIA/TIA-568B 150-ohm STP (100 meters max.)
10G CX-4 10Gigabit copper port (Up to 15m)
1000BASE-LX Single-mode fiber module (10Km)
1000BASE-SX Multi-mode fiber module (550m)
1000BASE-LH Single-mode fiber module (40km)
1000BASE-ZX Single-mode fiber module (80km)
10Gigabit - XFP
Please refer to the D-Link
datasheet for DEM-421XT and
DEM-422XT should there be
any questions
Single/Multiple fiber XFP transceiver