Filter
Top Products
Vigor2750 Series User’s Guide
96
DHCPv6 client mode would use IA_PA option of DHCPv6 protocol to obtain IPv6 prefix
from server.
T
T
S
S
P
P
C
C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexage
(http://go6.net/4105/register.asp) before you try to use TSPC for network connection. TSPC
would connect to tunnel broker and requests a tunnel according to the specifications inside the
configuration file. It gets a public IPv6 IP address and an IPv6 prefix from the tunnel broker
and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Username Type the name obtained from the broker. “vigor2750” is a
default username applied from
http://go6.net/4105/register.asp
. It is suggested for you to
apply another username and password.
Password Type the password assigned with the user name.
Confirm Password Type the password again to make the confirmation.
Tunnel Broker Type the address for the tunnel broker IP, FQDN or an
optional port number.