Filter
Top Products
Vigor2750 Series User’s Guide
109
Primary DNS Display the specified primary DNS setting.
Secondary DNS Display the specified secondary DNS setting.
Wireless LAN-------
MAC Address Display the MAC address of the wireless LAN.
Device Type Display the device type used for wireless LAN.
SSID Display the SSID of the router.
Channel Display the channel that wireless LAN used.
Manufacturer Display the manufacturer of the disk.
Model Display the model of the disk.
Size Display the storage size of the USB diskette.
Status Display current status of the USB diskette.
3
3
.
.
1
1
1
1
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server: