Filter
Top Products
Vigor2750 Series User’s Guide
4
1
1
.
.
2
2
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
7
7
5
5
0
0
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
(Hardware
Packet
Accelerate)
Off Hardware NAT is disabled.
On The DSL port is connected.
Blinking
(Slowly)
The router is ready.
DSL
Blinking
(Quickly)
The connection is training.
On
(Green)
The port is connected with 1000Mbps.
Blinking
(Green)
The data is transmitting.
On
(Orange)
The port is connected with 100Mbps.
LAN1/2/3/4
Blinking
(Orange)
The data is transmitting.
USB1/2 On A USB device is connected and active.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
WLAN On Wireless access point is ready.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
WPS Button
Off The WPS is off.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet.
LAN (1-4) Connectors for local network devices.
USB (1-2) Connector for USB storage device (Pen
Driver/Mobile HD) or printer or 3G backup.