Filter
Top Products
Vigor2750 Series User’s Guide
127
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask Type the subnet mask if you chose Static IP as the WAN IP.
Primary DNS Server You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Secondary DNS Server You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 194.98.0.1 to this
field.
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand and
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
MTU Size It means Max Transmit Unit for packet. The default setting is
1442.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.