Draytek 2750 Network Router User Manual


 
Vigor2750 Series User’s Guide
158
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose TCP as IP Protocol Filter, you will get the page as the following:
Source IP Specify the source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the source IP
Address and source IP Mask fields that appear.
Source IP Address Type the source IP Address here. This option is available
when you choose Host or Network as source IP filter.
Source IP Mask Type the SIP Mask here. This option is available only
when you choose Network as source IP filter.
Dest IP Filter Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP filter is set to Network. Specify
the destination IP address and destination IP mask in the
destination IP Address and destination IP Mask fields that
appear.
Dest IP Address Type the destination IP Address here. This option is
available when you choose Host or Network as
destination IP filter.
Dest IP Mask Type the destination IP Mask here. This option is available
only when you choose Network as destination IP filter.