Filter
Top Products
Vigor2750 Series User’s Guide
110
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Check /Uncheck
Enable – Allow/Deny the CPE
Client to connect with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Uncheck Enable – The system will not send inform
message to ACS server.
Check Enable – The system will send inform message to
ACS server periodically (with the time set in the box of
interval time).
The default setting is Enable. Please set interval time or
schedule time for the router to send notification to CPE.
Or click Disable to close the mechanism of notification.
3
3
.
.
1
1
1
1
.
.
3
3
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Old Password Type in the old password. The factory default setting for
password is blank.
New Password Type in new password in this filed.
Confirm New Password Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.