Filter
Top Products
AD
S
L Router User Manua
l
4
Connect the supplied power adapter to the
PWR port of your ADSL Router, and
plug the other end to a power outlet.
Turn on the power switch.
USB Driver Installation
If the ADSL Router is connected to a PC through USB interface, you will be prompted for the USB
drivers when plugging the USB cable to the PC. Refer to the relevant operating system to install the
USB drivers. Otherwise, you may skip this chapter.
Note: This section is for the model with USB interface only. If
your router does not support USB interface, please skip this
section.
For Windows ME
Run the USB installation program from the CD provided by your router package.
An InstallShield Wizard will appear. Please wait for a moment.
When the InstallShield Wizard Complete appears, click Finish.
Plug the USB cable between your router and PC.
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
The USB driver installation finished. You can use the router now.
For Windows 2000
Run the USB installation program from the CD provided by your router package.
An InstallShield Wizard will appear. Please wait for a moment.
When the welcome screen appears, click Next for next step.
When the InstallShield Wizard Complete appears, click Finish.
Plug the USB cable between your router and PC.
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
The system will detect the USB driver automatically. When the system detects it, a dialog of
Digital Signature Not Found will appear. Click Yes for next step.