Filter
Top Products
Ch
apter 4: We
b
C
on
fi
gurat
i
on
25
Quick Start
Connect to Internet
A quick way to connect to Internet by using
PPPoE interface, click Connect to Internet
to open the web page.
Enter the user name and password for your
ADSL router and click Connect.
The system will connect automatically.
Quick Setup
The quick setup wizard will guide you to
configure the DSL router through some
steps.
VPI (Virtual Path Identifier): Identifies the
virtual path between endpoints in an ATM
network. The valid range is from 0 to 255.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints in an
ATM network. The valid range is from 32 to
65535 (1 to 31 is reserved for well-known
protocols).
After finished entering the VPI/VCI value,
please click Next for next step
Connection Type
After clicking on the Next button from the
VPI/VCI web page, the following screen will
appear. Please choose the connection type
and encapsulation mode that you want to use
and click Next for next page.
For example, PPP over Ethernet (PPPoE) in
this screen is selected.
PPP over ATM/ PPP over Ethernet
If the type you choose is PPP over ATM or PPP over Ethernet, please refer to the following
information.