Filter
Top Products
11
Names of things and what they do
AC Adaptor Jack
Connect the AC adaptor
(
PSA series
; sold separately)
to this jack. Insert the plug firmly so it won’t get
unplugged accidentally.
Power Switch
USB Connector
Use this when connecting the PC-50 to your computer via a USB cable.
Hold Jack
Connect a pedal switch to this jack and use it as a hold pedal.
Expression Jack
Connect an expression pedal to this jack and use it to control tone or volume in real time.
MIDI OUT Connector
These can be connected to the MIDI connectors of other MIDI devices to transmit MIDI messages.
ADVANCED DRIVER Switch
This switches the driver operation mode. Normally, you will leave this
ON
.
In MAC OS X, you can also use the PC-50 with the ADVANCED DRIVER switch OFF.
(
➝
Set the ADVANCED DRIVER
(p. 69))
Security Slot( )
http://www.kensington.com/
Side Panel
DC
Power-on status when using the AC adaptor or batteries
* If the AC adaptor is connected and batteries are inserted, the power supplied by the AC adap-
tor is used. If you disconnect the AC adaptor, the power supplied by the batteries is used.
OFF
Power is off
USB
Power on using a USB cable (when not using the AC adaptor)
* USB(=BUS power) can be used when the PC-50 is connected to your computer via a USB cable.
In this case, the power will be supplied from your computer via the USB cable. To use the PC-
50 with bus power, set the power switch to USB.
* For some computers, the PC-50 may not operate if bus power is used. In this case, use the AC
adaptor
(sold separately) or batteries.
fig.rear_50
8 97 121110 1413
7
8
9
10
11
10
12
13
14
PC-50_e.book 11 ページ ２００５年１１月１０日 木曜日 午前１０時３３分