Filter
Top Products
34
Getting Connected and Installing Drivers (Macintosh)
13
Exit
OMS Setup
.
From the
File
menu, choose
[Exit]
. If the
AppleTalk confirmation
dialog box
appears, click
[OK]
to close the dialog box.
■
FreeMIDI settings
1
Set the PC-50’s
ADVANCED DRIVER Switch
to the
ON
position.
* Installation cannot proceed as described below if the switch is turned OFF.
2
Use the USB cable to connect the PC-50 to your computer.
1.
Set the PC-50’s power switch to the
OFF
position.
2.
Use the USB cable to connect the PC-50 to your computer.
3
Set the PC-50’s
power switch
to the
USB
position.
* Connect the cable to the USB connector of the Macintosh itself, not to the USB
connector of the keyboard.
4
From the CD-ROM, drag the
Driver E (Mac OS 9,8)
-
FreeMIDI Setting
folder into the
FreeMIDI Applications
folder on the hard disk of your
Macintosh to copy it there.
5
Open the
FreeMIDI Applications
folder from the location into which you
installed
FreeMIDI
, and double-click the
FreeMIDI Setup
icon to start it up.
6
The first time you start up, use the following procedure.
1.
A dialog box saying
“Welcome to FreeMIDI!”
will appear.
Click
[Continue]
.
2.
The
FreeMIDI Preferences
dialog box will appear.
Click
[Cancel]
.
3.
The
About Quick Setup
dialog box will appear.
Click
[Cancel]
.
This completes installation of the driver.
Next, make MIDI device settings in your sequencer or other software.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PC-50’s input / output devices, refer to “Input / output devices” (p. 36).
Once the connections have
b
een completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
b
efore the unit will operate
normally.
If you are using the PC-50
in conjunction with other
MIDI devices, make
settings as described in
Readme_E.htm located in
the Driver E (Mac OS 9,8)
folder of the CD-ROM.
When “OMS is installed
on this computer...”
appears, click [FreeMIDI].
PC-50_e.book 34 ページ ２００５年１１月１０日 木曜日 午前１０時３３分