Filter
Top Products
39
Basic connections and MIDI flow
* If you want to use Media Player to play a sound module connected to the PC-50’s MIDI OUT connector, make
driver settings.(
Windows
: p. 24 /
Macintosh
: p. 28, p. 32).
fig.connect-MIDI-IF
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.
* Turn MIDI I/F MODE ON as described in
“MIDI I/F MODE”
(p. 65).
fig.flow-USB-on-e
USB connections with your computer
—
Using the PC-50 as a MIDI interface
Basic connections
MIDI flow
MIDI OUT DEVICE
PC-50 MIDI OUT
If you specify
PC-50 MIDI OUT
as the output port for your sequencer software, messages
will be transmitted from the MIDI OUT connector of the PC-50 itself.
* Turn MIDI I/F MODE ON as described in
“MIDI I/F MODE”
(p. 65)
.
MIDI IN DEVICE
PC-50
This port receives messages from the keyboard, Pitch Bend/Modulation Lever, and VALUE
encoder.
The port assignment determines how the keyboard, Pitch Bend/Modulation Lever, and
VALUE encoder are mapped to PC-50.
PC-50 KEYBOARD
The messages of the keyboard, Pitch Bend/Modulation Lever, and VALUE encoder will be
transmitted from here.
MIDI sound module (sold separately)
DP series
(sold separately)
EV-5
(sold separately)
MIDI
IN
AC adaptor (sold separately)
It is not necessary to connect the AC adaptor if you are using a
USB connection. However, with some computers, the PC-50 may
not operate when powered from the USB bus. In this case, set the
power switch to the DC position and connect the AC adaptor.
Roland
MIDI OUT
PC-50PC
USB
PC-50 MIDI OUT
PC-50 PC-50 KEYBOARD
MIDI I/F MODE ON
MIDI OUT DEVICE
MIDI IN DEVICE
PC-50_e.book 39 ページ ２００５年１１月１０日 木曜日 午前１０時３３分