Filter
Top Products
49
Use MIDI functionality
Here’s how to transmit a
bank select MSB (#CC00) message
on the
Current channel
(p. 45).
The
bank select LSB
and
program change message
you most recently transmitted (specified)
as described in “Transmitting a bank select LSB message” (p. 48) and “Transmitting a program
change message” (p. 47) will also be transmitted.
fig.BANK-1_75
fig.util*
1
Simultaneously hold the
[MIDI CH]
button and
[PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-50 enters UTILITY
mode.
2
Press
[BANK MSB]
key.
fig.BANK-2
3
Use the
VALUE encoder
or the
[0]
–
[9]
keys of the keyboard to specify the bank
select MSB that you want to transmit.
fig.enter
4
Press the
[ENTER]
button.
* The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The
bank select MSB message
has now been transmitted.
Transmitting a bank select MSB message
2
1
3
4
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PC-50_e.book 49 ページ ２００５年１１月１０日 木曜日 午前１０時３３分