Filter
Top Products
20
Getting Connected and Installing Drivers (Windows)
fig.05-5_40
9
In the dialog box that appears,
input the following into the
“Open”
field, and click
[OK]
.
(drive name):\Driver\XP2k\SETUPINF.EXE
* In the explanatory example shown here, the drive name is given as
“D:.”
The drive
name
“D:”
may be different for your system. Specify the drive name of your CD-
ROM drive.
The
SetupInf
dialog box will appear.
You are now ready to install the driver.
10
Set the PC-50’s
ADVANCED DRIVER Switch
to the
ON
position.
* Installation cannot proceed as described below if the switch is turned OFF.
11
Use the USB cable to connect the PC-50 to your computer.
1.
Set the PC-50’s power switch to the
OFF
position.
2.
Use the USB cable to connect the PC-50 to your computer.
12
Set the PC-50’s
power switch
to the
USB
position.
Near the task bar, your computer will indicate
“Found New Hardware.”
Please wait.
13
The
Insert Disk
dialog box will appear.
Click
[OK]
.
To check the drive name
In the Windows desktop,
double-click the My
Computer icon. In the
window that appears,
check the drive name of
the CD-ROM drive into
which you inserted the
CD-ROM in step7.
The drive name is the (D:)
or (E:) displayed by the
CD-ROM drive .
Once the connections have
b
een completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
b
efore the unit will operate
normally.
If the “File signature verification” (Step 4) (p. 19) setting was not set to
“Ignore,” a “Digital Signature Not Found” dialog box will appear.
If “File signature verification” is set to “Warn”
1. Click [Yes].
2. Continue the installation.
If “File signature verification” is set to “Block”
1. Click [OK].
2. When the “Found New Hardware Wizard” appears, click [Finish].
3. Return to step 1 (p. 19) and re-install the driver from the beginning
of the procedure.
If the Insert Disk dialog
b
ox does not appear,
proceed to the next step.
PC-50_e.book 20 ページ ２００５年１１月１０日 木曜日 午前１０時３３分