Filter
Top Products
65
Using the V-8 with Other Equipment
(continued)
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
1
Press the [MENU] button to access the menu, and choose “MIDI Setup.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “MIDI Setup.”
Press the [ENTER] button to confirm your selection.
2
Referring to the table below, use the [ ] [ ] buttons to select the item you want to edit, and
press the [ENTER] button.
3
Using the [ ] [ ] buttons to change the value, specify the MIDI message that you want to
assign to the button or knob.
Assign the MIDI messages so that they match the MIDI messages that are transmitted/received by the MIDI device
you’ve connected.
Example) When you want to control video fader operations using the fader of your MIDI controller
Assign “Video Fader Assign” to the same MIDI message that is transmitted when you operate the fader of your MIDI
controller.
4
Press the [MENU] button several times to close the men
Specifying the MIDI message assigned to a button or knob
Menu item Details
Input Select A Assign
Bus A INPUT SELECT buttons
Input Select B Assign
Bus B INPUT SELECT buttons
Effects-A1 Assign
[1 (FEEDBACK)] button
Effects-A2 Assign
[2 (NEGATIVE)] button
Effects-A3 Assign
[3 (COLORIZE)] button
Effects-A4 Assign
[4 (MULTI)] button
Effects-B1 Assign
[1 (FLIP)] button
Effects-B2 Assign
[2 (CHROMA KEY)] button
Effects-B3 Assign
[3 (LUMINANCE KEY)] button
Effects-B4 Assign
[4 (P in P)] button
Fade A Switch Assign
Bus A [FADE] button
Fade B Switch Assign
Bus B [FADE] button
Control A Assign
Bus A [CONTROL] fader
Control B Assign
Bus B [CONTROL] fader
Video Fader Assign
Video fader
Transition Assign
TRANSITION buttons
Transformer A Assign
Bus A [TRANSFORMER] button
Transformer B Assign
Bus B [TRANSFORMER] button
BPM SYNC Assign
[BPM SYNC] button
Transition Time Assign
Image switching time in PR Control mode (p. 75)
BPM/CONTROL Assign
[BPM/CONTROL] knob
Output Fade Assign
[OUTPUT FADE] fader
White/Black Assign
[WHITE/BLACK] switch
PC Input Select Assign
[PC INPUT SELECT] switch
Preview Output Assign
PREVIEW OUTPUT SELECT buttons
Memory Assign
[MEMORY] knob
V-8_e.book 65 ページ ２００８年５月１５日 木曜日 午後１時１１分