Filter
Top Products
85
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
Menu List
(continued)
*4 Mem1 (Memory number 1) contains the factory preset settings. These settings cannot be modified. For details on the MEMORY function,
refer to “Storing the Operating Panel Settings” (p. 28).
*4 For details on the factory settings for Mem1–8 (memory numbers 1–8), refer to “Factory settings: Mem1–8” (p. 88).
MIDI-related settings are made here.
Specifies the MIDI messages assigned to
each button or fader
Bus A [FADE] button
OFF
, CC 01–CC 05, CC 07–CC 31,
CC 64–CC 95, ChAftTt, PitchBD
p. 65
Bus B [FADE] button
Bus A [CONTROL] fader
Bus B [CONTROL] fader
Specifies the MIDI message assigned to the
Video fader
OFF, CC 01–CC 05, CC 07–
CC 11
–CC 31,
CC 64–CC 95, ChAftTt, PitchBD
Specifies the MIDI messages assigned to
each button or fader
TRANSITION buttons
OFF
, CC 01–CC 05, CC 07–CC 31,
CC 64–CC 95, ChAftTt, PitchBD
Bus A [TRANSFORMER] button
Bus B[TRANSFORMER] button
[BPM SYNC] button
Specifies the MIDI message that will adjust
the transition time when using PR Control
Mode (p. 75)
OFF, CC 01–CC 05,
CC 07
–CC 31,
CC 64–CC 95, ChAftTt, PitchBD
Specifies the MIDI messages assigned to
each button or fader
[BPM/CONTROL] knob
OFF
, CC 01–CC 05, CC 07–CC 31,
CC 64–CC 95, ChAftTt, PitchBD
[OUTPUT FADE] fader
[WHITE/BLACK] switch
[PC INPUT SELECT] switch
PREVIEW OUTPUT SELECT buttons
Specifies the MIDI message assigned to the
[MEMORY] knob
CC 00 + CC 32 + PC
, CC 01–CC 05,
CC 07–CC 31, CC 64–CC 95,
ChAftTt, PitchBD
Turns MIDI message transmission on/off
when buttons or faders are operated
01: Video+MidiOut, 02: Video Only,
03: Midi Out Only
p. 67
Turns PR Control Mode on/off
Off
, On
p. 75
Main menu
(First level)
Sub-menu
(Second level)
Value
(The factory setting is printed in bold characters.)
See
page
MIDI Setup (continued)
Fade A Switch Assign
Fade B Switch Assign
Control A Assign
Control B Assign
Video Fader Assign
Transition Assign
Transformer A Assign
Transformer B Assign
BPM SYNC Assign
Transition Time Assign
BPM/CONTROL Assign
Output Fade Assign
White/Black Assign
PC Input Select Assign
Preview Output Assign
Memory Assign
Panel Mode [Mem2]–[Mem8] *
4
PR Control
V-8_e.book 85 ページ ２００８年５月１５日 木曜日 午後１時１１分