Filter
Top Products
Web-based Configuration Interface: Starting the Web-based Configuration Interface Page 41
Starting the Web-based Configuration Interface
Only one user can access the web-based configuration interface at a time.
Procedure
1.
If you installed the Diva Assistant, double-click the icon in the Windows system
tray, click the ‘Tools’ tab, then click ‘Configure’.
If you do not have access to the Diva Assistant, start your web browser and click
‘File’, ‘Open’. Type
192.168.1.1
and click ‘OK’.
2.
You will see the ‘Log In’ page.
3.
Enter the system password, if required, and click ‘Log In’.
By default, there is no password.
Note:
The IP address 192.168.1.1 is the default IP address for the Diva 2430. If you have
changed the IP address, you must use the new address.