Filter
Top Products
Web-based Configuration Interface: Upgrading Firmware Page 44
Upgrading Firmware
The Diva 2430 contains special software, called firmware, that controls its operation.
The firmware is stored in flash memory, which allows it to be replaced by uploading a
new version.
The Diva 2430 CD contains firmware that may be more recent than the version
currently installed on your Diva 2430. In addition, Eicon Networks posts the latest
Diva 2430 firmware on its web site. An added benefit of visiting the Eicon Networks
web site is that you can register your purchase.
Backing up Configuration Files
If you wish, you can create a backup of your configuration settings before updating
your firmware. See
Saving and restoring configuration files
on page 43.
To backup your configuration, click ‘Configuration’ from the main menu, then click
‘Backup’.
Opening to the Firmware Maintenance Page
From the main page, click ‘Firmware’ from the main menu. The Diva 2430 displays
the ‘Firmware Maintenance’ page.
Retrieving Firmware from the Eicon Networks Web Site
To retrieve new firmware from the Eicon Networks web site, click the ‘Visit’ button.
This points your web browser to the Diva 2430 firmware upgrade page on the Eicon
Networks web site.
Note:
Configuration settings are not lost when upgrading the firmware to a newer version.
However, configuration settings may be lost if you upload an older firmware on the device.
Note:
To acquire new firmware from the Eicon Networks web site as described below, your
connection to the Internet must be already set up and working properly.