Filter
Top Products
Web-based Configuration Interface: Starting the Web-based Configuration Interface Page 42
4.
The Diva 2430 then displays the ‘Main Configuration’ menu.
5.
Click on any of the links in the ‘Administration’ section to change settings.
‘Save’, ‘Reset Form’, and ‘Cancel’ Buttons
• Each configuration menu has a ‘Save’ button. For the ‘ADSL’, ‘System’, and
‘Security’ menus, the changes you make become active once you click ‘Save’.
However, for changes made in the ‘ATM’ menu to take effect, you must also reset
the device by clicking ‘Reset’.
• If you click ‘Cancel’, you are returned to the main menu, and any changes you made
to settings without saving are lost.
• Click ‘Reset Form’ to return all settings in the current page to the values they had
when you initially opened the page.
• To access online help, click on a setting’s name. A help window will appear with a
description of that setting. Brief information on each setting can also be found in
Configuring Settings via the Web Interface
on page 22.
• If this is the first time you have configured the device, you may need to wait up to
one minute (after making changes) before being able to access the Internet. This is
because your computer may have initially been assigned its network settings from
the Diva 2430, as the ADSL line was down and your provider’s server was not
available. If, after a minute, it is still not working, reboot your computer in order to
force a new DHCP request.
‘Reset’ and ‘Logout’ buttons on the main menu
Changes you make to most settings take effect immediately after you click ‘Save’.
However, you must reset the device when you make changes to ATM settings. To reset
the device, click the ‘Reset’ button located on the main menu, or press the Reset
button on the device itself. When you click ‘Logout’, you close the web-based
configuration interface and are presented with the ‘Login’ page. The ‘Display System
Log’ button will show the most recent log entries.
Getting Help
Context-sensitive help is available for each parameter. Click the parameter name to
display its description.