Filter
Top Products
Web-based Configuration Interface: Upgrading Firmware Page 45
Uploading New Firmware
1.
From the ‘Firmware’ page, click the ‘Browse’ button.
2.
Select the new firmware file.
If you downloaded new firmware, point to the file you downloaded from the Eicon
Networks web site. A firmware file is also located in the ‘Firmware’ folder on the
CD-ROM that came with your Diva 2430.
3.
Click the ‘Upgrade’ button to upload the firmware to the Diva 2430.
This may take a few minutes. Do not turn off or unplug the device during this time.
When complete, the Diva 2430 is automatically reset to activate the new firmware.
There is no need to click the ‘Reset’ button on the ‘Main Configuration’ menu.