Filter
Top Products
Compu Live III Intermediate programming
channel. For the moment, it is best if you leave all channels as EasyStep channels.
When you create an EasyStep sequence, you can go through your steps for each channel in one of two
ways: with or without fade. Light beam movement might look better fading in between positions, but
gobo rotation might look better as a step change in between the two. To do this, you must use the
"EasyStep with fade" function on Pan/Tilt channels and "EasyStep without fade" function on the gobo
channels, for example.
To change these properties, use the two EasyStep buttons at the bottom left, where the top ramp-like
button represents WITH FADE, and the second step-like button WITHOUT FADE).
Each corner in the picture represents the X-Y position in each step. These can be moved
individually with the mouse. Steps with fade in between show dotted lines in between the corners in the
shape area. Steps can be selected by clicking on the corresponding point (white area) or directly from
the step list at the top.
To set the FADE and WAIT times for each step, use the number boxes at the top
(minutes.seconds.1/100). The top box controls fade and the bottom one wait times.
Page 37