Filter
Top Products
NetSure™ ITM with eSure™ Technology
Installation Manual, Section 6040 (Issue AB, April 8, 2013)
Spec. No: 582145500
20
Section 6040
Model: NetSure™ ITM Issue AB, April 8, 2013
• When laying power cables, do not form coils; this will help avoid increasing formation of
electromagnetic interference. Positive and negative cables should be run together.
• Alarm/control wiring and power wiring must be run separately.
Output and input cables must be run separately.
4.2 Protective Covers
Wiring connection access requires removing protective covers from the DC UPS module. When
making electrical connections, remove the appropriate protective cover, as shown in Figure 9.
Replace all protective covers after all electrical connections have been made and checked.
Figure 9 Protective Covers
Front View
(Top Cabled Configuration)
Rear View
Protective Cover
Protective Cover
Protective Cover
Protective Cover
Protective Cover
Protective Cover
Protective Cover
Protective Cover
Front View
(Bottom Cabled Configuration)
SUITABLE FOR MOUNTING ON CONC RETE
OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
SUITA BLE F OR M OU NT IN G ON C ON C RET E
OR OT HE R NO N -CO MB US TI BLE SU R FA CE ON LY .
Protective Cover
Protective Cover
Dual AC Input
Circuit Breaker Option
Protective Cover View
(Top cabled configuration shown,
bottom cabled configuration similar.)
AC Input
Protective Cover
AC Input Protective
Cover Removed