Filter
Top Products
NetSure™ ITM with eSure™ Technology
Installation Manual, Section 6040 (Issue AB, April 8, 2013)
Spec. No: 582145500
45
Section 6040
Model: NetSure™ ITM Issue AB, April 8, 2013
Perform InterCell Resistance Calibration
Use the Alber software to run an Intercell Resistance test.
1. After making final battery connections and before installing battery fuses, perform the following:
a. Disconnect the RS-485 cable from the back of the SM-BRC.
b. Connect the USB cable from the SM-BRC to your computer.
c. Start the ALBER Configurator.
2. Click on the "Connect to Monitor" button at the top of the screen.