Filter
Top Products
Troubleshooting
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
106
A.10.2 Mouse Cannot Be Used
Description
The mouse cannot be used.
Solution
To solve the problem, proceed as follows:
1. Make sure that the cable of the mouse is connected properly and firmly and that the cable
of the mouse and that of the keyboard are not connected reversely.
2. Make sure that the mouse works well on other ATCA-7150s.
3. Make sure that the mouse has been properly installed with drivers.
4. Make sure that the ATCA-7150 is powered on and started normally.
5. Replace the mouse.
For details, refer to the document shipped with the mouse that you use.
A.10.3 Monitor Remains Dark
Description
When you connect the monitor to the running ATCA-7150 or start some applications of the
ATCA-7150, the monitor remains dark.
Solution
To solve the problem, proceed as follows:
1. Make sure that the power cable of the monitor is connected properly.
2. Make sure that the monitor is connected to the RTM of the server blade properly and
firmly.
3. Make sure that you have turned on the monitor and properly adjusted the luminance and
contrast control.
4. Power off the ATCA-7150 and then power it on again.