Filter
Top Products
Hardware Installation of ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
92
6. User the screwdriver to clockwise fasten the screws to fix the ATCA-7150, as shown in
Figure 3-8.
7. Fully open the ejector handles and the ATCA-7150 is ready for power-on. Before you power
on the ATCA-7150, connect the required external cables and check that the ATCA-7150 is
installed properly.
3.7.1.2 Checking the Installation
After you install the RTM of the server blade and the ATCA-7150, and connect and bind cables,
check whether:
z The ATCA-7150 and RTM are installed in the paired slots.
z The upper and lower ejector handles of the RTM are fully closed.
Figure 3-8 Installing the ATCA-7150
2
1
3
3
2