Filter
Top Products
Hardware Installation of ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
84
7. Insert the ATCA-7150 with the DIMM installed in the shelf.
For details, see Installing the ATCA-7150 in a Powered Shelf on page 91.
After installation, insert the ATCA-7150 in the shelf and power on the ATCA-7150. Check
whether the OS can be loaded properly. If it can be, in the OS, check whether the displayed
memory capacity is consistent with the actual one.
3.6.4.2 Replacing the DIMM
To replace the DIMM, proceed as follows:
1. Wear the ESD-preventive wrist strap.
For details, see Wearing the ESD-Preventive Wrist Strap on page 75.
2. Remove the ATCA-7150 whose DIMM is to be replaced.
Figure 3-4 Installing the DIMM
2
2
1
You can install the DIMMs in other DIMM interfaces in the same way.