Filter
Top Products
Hardware Installation of ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
93
z The cables are properly connected.
z The cables are well bound.
3.7.1.3 Power-On
3.7.1.3.1 Checks Before Power-On
Before power-on, you need to confirm that:
z The RTM of the server blade and SMM are installed properly.
z The shelf and SMM are powered on properly.
z The required external cables are connected.
z The upper and lower ejector handles of the ATCA-7150 are opened.
3.7.1.3.2 Procedure
To power on the ATCA-7150, proceed as follows:
1. Wear the ESD-preventive wrist strap.
For details, see Wearing the ESD-Preventive Wrist Strap on page 75.
The RTM of the server blade is powered by the ATCA-7150 in the slot paired with the RTM
slot. The RTM of the server blade does not support hot swap. Therefore, the RTM must be
installed in the slot before the ATCA-7150 is installed in the paired slot.