Filter
Top Products
NetWin 110 HBA User’s Guide Page 1-8
1.4.5. Viewing an HBA’s General Information
The General page displays relevant
information about the selected
HBA, such as the model number,
firmware version, driver version and
link status.
The Adapter Summary area of the
General page displays the
following:
• Model- the complete model
name of the selected host
bus adapter.
• Port WWN- the Port World
Wide Name of the selected
adapter.
• Node WWN- the Node
World Wide Name of the
selected adapter.
• Fabric Name- The name of
the host or fabric to which
the selected HBA belongs.
• Driver Version- the driver version in use by the selected HBA.
• Firmware Version- the firmware version in use by the selected HBA.
• Driver Name- the name of the driver installed on the selected HBA.
• Boot Bios- the x86 BootBIOS version being used by the selected HBA if x86 BootBIOS is enabled. Disabled
is displayed if x86 BootBIOS is not enabled. Not Present is displayed if x86 BootBIOS is not installed on the
HBA.
The Adapter Status area of the General page displays the following:
• State- the current operational state of the selected HBA. The state can be “Up”, “Down” or “Not Discovered”.
• Link Status- the current link status between the selected HBA and the fabric. The status can be “Operational”
or “Link Down”.
• Link Speed- the current link speed of the selected HBA.
To view the General page, from the discovery tree select the HBA whose general information you wish to view.