Filter
Top Products
NetWin 110 HBA User’s Guide Page A-1
A. Installing the Low-Profile Bracket
The host bus adapter comes with a standard PCI bracket installed. The optional low-profile mounting bracket is
shorter than the standard bracket; approximately 3.11 in. (7.9 cm) compared to 4.75 in. (12.06 cm) long.
1. Remove the mounting bracket screws from the top of the host bus adapter.
2. Remove the bracket and store it for future use.
3. Align the new mounting bracket tabs with the holes in the HBA.
Note: Be careful not to push the bracket past the transceiver housing's grounding tabs.
4. Replace the screws that attach the HBA to the bracket.