Filter
Top Products
LANVIEW LEDs 4-1
4
LANVIEW LEDs
This chapter describes how to use the LANVIEW LEDs to monitor VHSIM2-A6DP status and
diagnose VHSIM2-A6DP problems. Figure 4-1 shows the location of the LANVIEW LEDs
(Transmit, Receive, STS and LNK).
4.1 VHSIM2-A6DP LEDs
Refer to Table 4-1 and Table 4-2 for a description of VHSIM2-A6DP and APIM/VAPIM LEDs.
Figure 4-1 VHSIM2-A6DP and APIM/VAPIM LEDs
NOTE: The terms flashing, blinking, and solid used in the LED definition tables of this
chapter indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse.
Solid indicates a steady LED light. No pulsing.
2825_25
APIM/VAPIM Status (STS)
VHSIM2-A6DP
APIM 1 APIM 2
APIM-21R
STS
LNK
APIM-21R
STS
LNK
VHSIM2 Transmit (TX)
VHSIM2 Receive (RX)
APIM/VAPIM Link (LNK)