Filter
Top Products
Signalling Screen
3-60 Local Management
3.17.3 Changing the UNI Status
To change the UNI status from the default state of Enabled, perform the following steps:
1. Use the arrow keys to highlight the UNI Status field.
2. Press the SPACE bar until the option Disabled displays.
3. Use the arrow keys to highlight the SAVE command and press ENTER. UNI has been disabled.
3.17.4 Restarting UNI
To restart UNI, perform the following steps:
1. Use the arrow keys to highlight the RESTART UNI command located on the bottom of the
screen.
2. Press ENTER. UNI is restarted.
3.17.5 Restarting the ILMI
To restart the ILMI, perform the following steps:
1. Use the arrow keys to highlight the RESTART ILMI command located on the bottom of the
screen.
2. Press ENTER. The ILMI is restarted.
CAUTION: Before completing the following step, ensure that this caution is fully
understood. By disabling UNI, ALL SVCs currently operating on the VHSIM2-A6DP will
be lost.
If UNI is disabled, the VHSIM2-A6DP will no longer support SVCs or LAN Emulation.
Before completing the following step, ensure that this caution is fully understood. By
restarting UNI, ALL SVCs currently operating on the VHSIM2-A6DP will be lost.
CAUTION: Before completing the following step, ensure that this caution is fully
understood. By restarting ILMI, ALL SVCs currently operating on the VHSIM2-A6DP will
be lost.