Filter
Top Products
LEC Table Screen
3-38 Local Management
LEC TRANSMIT QUEUES
This menu item opens the Traffic Management LEC Priority Queues screen. This screen is used to
assign 802.1P priorities to a LEC.
Refer to Section 3.16.
3.12 LEC TABLE SCREEN
The LEC Table screen is a read-only screen that is used to view the status of all LECs currently
configured on the VHSIM2-A6DP.
To access the LEC Table screen from the LAN Emulation Clients screen, perform the following
steps:
1. Use the arrow keys to highlight the LEC TABLE menu item on the LAN Emulation Clients
screen.
2. Press ENTER. The LEC Table screen, Figure 3-14, displays.
Figure 3-14 LEC Table Screen
The following list explains each of the LEC Table screen fields:
IF (Read-Only)
Displays the MIB-II Interface that this LEC has been assigned dynamically. The value assigned to
this field is necessary when using the ATM Connection Setup by Virtual Interface screen
(Section 3.7).
RETURNEXIT
IF Port Index LEC ID Ver ELAN ID ELAN Name LEC State
25 29 1 0 2.0 0 Ctron1 Operational
All values correspond with the lecStatusTable of the ATM Forum LEC MIB.
2825_19