Filter
Top Products
ATM Connections Screen
3-10 Local Management
3.3 ATM CONNECTIONS SCREEN
The ATM Connections screen allows the user to open the ATM Connections Setup screen, and the
ATM Connection Setup by Virtual Interface screen.
To access the ATM Connections screen from the ATM screen, perform the following steps:
1. Use the arrow keys to highlight the CONNECTIONS menu item of the VHSIM2-A6DP ATM
screen.
2. Press ENTER, the ATM Connections screen, Figure 3-4, displays.
Figure 3-4 ATM Connections Screen
The following list explains each of the ATM Connections screen fields:
CONNECTION TABLE
This menu item opens the ATM Connection Setup screen. This screen is used to view all current
ATM connections. This screen also provides access to the Traffic Management PVC Priority
Assignments and the Add/Delete Entry screens, which allow the user to create, modify, or delete
PVCs. The Traffic Management PVC Priority Assignments screen is only available when the
device is configured for 802.1Q. The Add/Delete Entry screen is only available when the device is
configured for SecureFast. For the ATM Connection Setup screen, refer to Section 3.4.
NOTE: The Add/Delete Entry screen will display only if the host device has been set
to operate as a SecureFast switch. Refer to the Local Management chapter of the host
device for instructions on configuring the host device for this type of operation.
RETURN
CONNECTION TABLE
CONNECTIONS BY VIRTUAL INTERFACE
EXITSAVE
2825_11