Filter
Top Products
Installing APIMs
2-2 Installation
2.2 INSTALLING APIMs
To install an APIM into the VHSIM2-A6DP, proceed as follows:
1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package).
2. Remove and save the faceplate screws attaching the faceplate to the VHSIM2-A6DP. See
Figure 2-1. Remove the VHSIM2-A6DP faceplate.
3. Remove and save the three screws from the VHSIM2-A6DP standoffs. Remove the APIM
coverplate.
NOTE: To install VAPIMs, refer to Section 2.3.
ELECTRICAL HAZARD: Only qualified personnel should install or service this unit.