Filter
Top Products
LEC Priority Queues Screen
3-54 Local Management
SEARCH (Command)
Performs a search of the LEC ARP Cache based on the search term specified in the ADDR or
VPI/VCI fields below the Search By field. This command is only available if a valid search term is
entered.
3.15.1 Performing a Search
To perform a LEC ARP cache search, perform the following steps:
1. Use the arrow keys to highlight the LEC Index field.
2. Use the SPACE bar to move through the available indexes until the appropriate LEC Index
displays.
3. Use the arrow keys to highlight the Search By field.
4. Press the SPACE bar to toggle through the options until the desired search method displays.
5. Use the arrow keys to move to the field that displays below the Search By field.
6. Enter the search term. Depending on the setting of the Search By field, enter one of the
following items:
• an ATM address
• a VPI, VCI pair
• a MAC address
7. Use the arrow keys to highlight the SEARCH command at the bottom of the screen and press
ENTER.
When the search is completed, the screen refreshes with the results of the search.
3.16 LEC PRIORITY QUEUES SCREEN
The LEC Priority Queues screen is used to assign up to eight 802.1P priorities to a LEC.
To access the LEC Priority Queues screen from the LAN Emulation Clients menu screen, perform
the following steps:
1. Use the arrow keys to highlight the LEC TRANSMIT QUEUES menu item of the LAN
Emulation Clients screen.
2. Press ENTER. The LEC Priority Queues screen, Figure 3-19, displays.