Filter
Top Products
Port Framer Configuration Screen
Local Management 3-29
ATM Port Type (Read-Only)
Displays the type of APIM installed in the VHSIM2-A6DP. This field displays all important
information about the APIM. For example, the ATM Port Type field in Figure 3-11 is defined as
follows:
• 155 Mbps signifies the amount of bandwidth the APIM supports.
• SONET/SDH displays the two transmission types that the APIM supports.
• OC-3 signifies the class of ATM service the APIM provides.
• MMF signifies that this APIM supports multimode fiber optic cabling.
• SC signifies that the APIM has SC style connectors to attach the physical cabling.
For details on the available APIMs, refer to Appendix B.
Statistics (Toggle)
This field toggles between OFF and ON. The default setting for this field is OFF.
Alarms (Toggle)
This field toggles between OFF and ON. The default setting for this field is OFF.
Idle Cells (Toggle)
Toggles between UNASSIGNED and OFF. The default setting for this field is UNASSIGNED.
Cell Payload Scrambling (Toggle)
Toggles between ON and OFF. The default setting for this field is ON.
Transmission Type (Toggle)
Depending on the APIMs installed, this field may display one of the following options:
• SONET
• SDH
• TAXI
• DS3
• STS3
SAVE (Command)
This command saves all changes to memory.
NOTE: The Transmission Type field is a only a toggle field for specific Enterasys
APIMs.