Filter
Top Products
Ethernet Adapter Manager Installation 4-5
Using the Ethernet Adapter Manager
The Configuration window File menu pull-down options allow you to:
• Save or load a configuration
• Reset the Ethernet Adapter to factory defaults
• Set a new password or clear it
• Access a view of the log files
• Update the Ethernet Adapter firmware
Table 4-2: Configuration Window Tab Information
Table 4-3: Configuration Window Button Information
Tab Name Action
Network Provides the configuration screens for the network
configuration.
Serial Provides the configuration screens for serial configuration.
Radio Provides the configuration screens for the PC Card.
Button Action
Close Closes the current configuration window.
Reload from Unit Allows you to discard the changes you have made to the
configuration and reload the current configuration from the
Ethernet Adapter to the Ethernet Adapter Manager.
Update and Reset
Unit
Downloads the parameters from the Ethernet Adapter Manager
to the Ethernet Adapter. During the download, a syntax check
is performed of all parameters. If the check is not successful,
an error message is displayed in the GUI Message Log
describing the errors and their location.