Filter
Top Products
B-6
Error Code Problem Steps to take
Hardware Errors
FLASH failure. Unable to
read or write configuration.
FLASH may be
damaged.
Configuration can-
not be accessed or
saved.
Contact Technical Support.
Initialization of interface
“lan0” failed.
Radio could not be
initialized.
Try each of these steps in order. If
any of these steps succeed, you
do not have to perform the rest of
the steps.
1)
Reset the Ethernet Adapter.
2) Unplug the power, wait for
approximately 30 seconds and
then reapply power.
3) Reset the Ethernet Adapter to
the factory default
configuration and reset the
Ethernet Adapter.
4) Contact Technical Support if
the problem persists.
xxxx: file does not exist. Configuration file
could not be found.
• Reset the configuration to
Factory Defaults, and reset the
Ethernet Adapter.
• If the problem persists,
contact Technical Support.